top of page
Biodolomer® T 900494

Biodolomer® T 900494

Biodolomer® T 900494 is a biodegradable biomaterial developed for the thermoforming process, and to withstand high temperatures.

Biodolomer® T 900494 is a high mineral-filled grade, microwave safe according to EN 15284:2007 and offers composting at ambient temperatures. It is certified compostable according to EN 13432:2000.

Biodolomer® T exhibits the following properties:

  • Medium strength and stiffness

  • Low melt strength: MFI (190 °C, 2.16 kg): 0.5 g

  • Good processability on conventional sheet extrusion lines up to 200 °C

  • Printable without corona treatment

  • Microwave safe according to EN 15284:2007

  • Compostable according to EN 13432:2000 up to 1 mm.

  • Compostable at ambient temperatures up to 0,5 mm (ready in Q4 2023).

Trials are always recommended to assess the quality of the final product.



Test method

Grade 900494

Typical Basic Material properties of grade 900494

Certification of Compostability and Biodegrade

Biodolomer® T fulfills the requirements of the existing standards for compostable and biodegradable polymers because it can be degraded by microorganisms.

The biodegradation process in soil depends on the specific environment (climate, soil quality, population of microorganisms).

Food Regulatory Status

Biodolomer® T complies in its composition with the European foodstuff legislation for food contact, EU Regulation 10/2011/EC, and its amendments up to 2020/1245/EC of 02 September 2020 on plastic materials and articles intended to come into contact with food.

Specific limitations and more details are given on request.

The converter or packer has to check the suitability of the article for the application

Biodolomer® T 900494

Form supplied and Storage

Biodolomer® T is supplied as lenticular pellets in big bags. Temperatures during transportation and storage may not exceed 60 °C at any time. Storage time of unopened bags may not surpass 12 months at room temperature (23 °C).


Biodolomer® T has been developed for the conversion to extruded films from 0.3 - 8 mm thickness using a sheet extrusion process with subsequent thermo-forming operation. Typical applications are packaging film/sheets for trays, boards, and other thermoformed containers or articles. In view of numerous factors influencing the functionality and shelf life of Biodolomer® films and finished articles made thereof, the production parameters have to be tested by the converters before utilization.


The information submitted in this document is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors of the responsibility of carrying out their own tests and experiments; neither do they imply any legally binding assurance for a special purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.

Datasheet updated

2023-05-17 10:0

(supersedes all previous editions)

bottom of page