Biodolomer® I 900236
Biodolomer® I 900236 is a biodegradable biomaterial developed for the injection molding process. It also works very well for 3D printing, once converted into 3D filament wire.
Bidolomer® I is made from renewable resources.
Property
Unit
Test method
Grade 900236
Mass Density
g/cm3
ISO 1183
1.3
Bulk Density
kg/m3
DIN EN ISO 60
800
MFI 190°C, 2.16 kg
g/1 min
ISO 1133
13-15
Tensile Strength
MPa
ISO 527
45
E-modulus
MPa
ISO 527
2022
Elongation
%
ISO 527
7
Transmission
Opaque
Shore Hardness
D
ISO 868
82
Melt temperature range
°C
-
170-210
Melt temperature ideal
°C
-
190
Heat Distortion Temperature B (0.45MPa)
°C
DSC
65
Tool temperature range
°C
-
15-25
Residence time, max.
Hours
-
2-3
Shrinkage
%
-
0.5
Home Composting
Microns
TUV AUSTRIA (EN13432)
-
Industrial Composting
Microns
TUV AUSTRIA (EN13432)
1000
Food Contact
-
Eurofins
Yes
Food Contact
-
FDA
Possible
Animal-Derived Content
-
-
No
Typical Basic Material properties of grade 900236
Certification of Compostability and Biodegrade
Biodolomer® I fulfills the requirements of the existing standards for industrial composting.
Food Regulatory Status
Biodolomer® I is one of the few compostable polymers, that complies in its composition with the European foodstuff legislation for food contact, EU Directive 10 / 2011 / EC with amendment 2023/1442.
Specific limitations and more details are given on request. The converter or packer has to check the suitability of the article for the application.
Form supplied and Storage
Biodolomer® I is supplied as lenticular pellets in big bags.
Temperatures during transportation and storage may not exceed 60 °C at any time.
Storage time of unopened bags may not surpass 12 months at room temperature(*).
(*) 23 °C
Applications
Injection-moldable products made from Biodolomer® I benefit from an optimum balance of rigidity and toughness. Biodolomer® I is very versatile in its range of applications by injection molding. They also enable customers to produce biodegradable plastic components on conventional injection molding machines. With our innovative Biodolomer® I grade, it is possible not only to fill thin-walled molds but also to achieve cycle times comparable with standard materials in the packaging industry. Furthermore, Biodolomer® I exhibit a noticeably increased flowability relative to comparable biodegradable injection molding grades.
Note
The information submitted in this document is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors of the responsibility of carrying out their own tests and experiments; neither do they imply any legally binding assurance for a special purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.
Datasheet updated
2025-08-05 9:30
(supersedes all previous editions)