Biodolomer® E 900328
Biodolomer® E 900328 is a biomaterial developed
for the extrusion of thin tube, pipe and straws.
It is basically a compound of a biodegradable aliphatic aromatic copolyester (PBAT), PLA, and minerals.
Property
Unit
Test method
Grade 900328
Mass Density
g/cm3
ISO 1183
1.28
Bulk Density
kg/m3
DIN EN ISO 60
800
MFI 190°C, 2.16 kg
g/1 min
ISO 1133
3.5
Melting Temp
°C
DSC
155
Heat Distortion Temperature B (0.45MPa)
°C
DSC
68
Transmission
Opaque
Tensile Strength
MPa
ISO 527
26
E-modulus
MPa
ISO 527
176
Elongation
%
ISO 527
59
Shore Hardness
D
ISO 868
70
Industrial Composting
Microns
DIN CERTCO
1000
Industrial Composting
Microns
BPI
1000
Food Contact
-
Eurofins
Yes
Food Contact
-
FDA
Possible
Animal-Derived Content
-
-
No
Typical Basic Material properties of grade 900328
Certification of Compostability and Biodegrade
Biodolomer® E fulfills the requirements of the existing standards for compostable and biodegradable polymers because it can be degraded by microorganisms.
The biodegradation process in soil depends on the specific environment (climate, soil quality, population of microorganisms).
Food Regulatory Status
Biodolomer® E is one of the few compostable polymers, that complies in its composition with the European foodstuff legislation for food contact, EU Directive 10 / 2011 / EC with amendment 2023/1442.
Specific limitations and more details are given on request. The converter or packer has to check the suitability of the article for the application.
Form supplied and Storage
Biodolomer® E is supplied as lenticular pellets in 1 t big bags. any time. Storage time of unopened bags is at least 12 months at room temperature (23 °C).
Applications
Biodolomer® E has been developed for the conversion to extruded thin tubes. Typical applications are straws for drinks & beverages.
In view of numerous factors influencing the functionality and shelf life of Biodolomer® E finished articles the production parameters have to be tested by the converters before utilization.
Note
The information submitted in this document is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors of the responsibility of carrying out their own tests and experiments; neither do they imply any legally binding assurance for a special purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.
Datasheet updated
2025-08-05 9:30
(supersedes all previous editions)